2014 Suzuki Hayabusa 50th Anniversary Edition
Seen with 120/70 17” tyres in the front and 190/50 17” tyres at the rear with a striking red stripe across will also set this special anniversary model apart from the rest.
Measuring 2,190 mm in length, 735 mm in width, 1,165 mm in height and weighing a total of 266 kgs, the 2014 Suzuki Hayabusa 50th Anniversary Edition will get the same engine in the form of a 1340cc four stroke, four cylinder, liquid cooled engine which is mated to a 6 speed gearbox. This engine offers 173 hp power and 141 Nm torque while it receives a 21 liter fuel tank.
The model receives twin Brembo discs in the front and a single disc at the rear while it also gets inverted telescopic coil springs in front and link type coil springs at the rear. Pricing for the US has not been announced for either 2014 GSX1300R Hayabusa or GSX1300R Hayabusa Limited Edition.
2014 Hayabusa 50th Anniversary Edition Features
Lighter and more rigid than conventional bolt-together calipers, the Hayabusa’s top-of-the-line radial-mount Brembo Monobloc front brake calipers deliver better feedback to the rider. Piston diameter was enlarged from 32-30mm to 32-32mm. Larger pistons help apply greater force to the brake disc, which results in increased initial bite and a more controlled feeling
The standard equipment Antilock Brake System (ABS) unit features a lightweight, compact design. The ABS enhances brake performance by helping prevent, to a certain extent, wheel locking due to changes in road conditions or excessive braking, by matching stopping power to available traction.
?The ABS is a supplemental device for brake operation, not a device for shortening stopping distance. Always remember to reduce speed sufficiently before approaching curves
A 1340cc in-line 4-cylinder fuel injected, DOHC liquid-cooled engine with 16-valves and Twin Swirl Combustion Chambers (TSCC) provides phenomenal power and broad torque delivering breath taking acceleration.
Lightweight aluminum alloy pistons with a compression ratio of 12.5:1 are used for maximum performance in all connditions. Hard, smooth chrome-nitride Physical Vapor Deposition (PVD) coating on the upper compression and oil control rings on each piston reduces friction while improving cylinder sealing.
Suzuki Composite Electrochemical Material (SCEM) cylinder plating improves heat transfer, durability and ring seal.
Lightweight titanium valves allow the use of light valve springs and high lift while maintaining accurate valve control. Iridium spark plugs are used for high combustion efficiency.
Curved radiator with a compact, dense-core design and engine-management-computer-controlled two ring-type electric fans mounted on the rear of the radiator, increasing the control accuracy and keeping engine temperature stable.
The Hayabusa’s engine is fed by tapered, 44mm double barrel Suzuki’s SDTV (Suzuki Dual Throttle Valve) throttle bodies utilizing dual 12-hole, fine-spray injectors per cylinder and ram air intake with large volume airbox. This precise, carefully controlled system improves combustion efficiency results in improved power delivery and a more linear response.
Idle Speed Control (ISC) system improves cold starting and helps maintain stable engine idle under various conditions.
Suzuki Pulsed-secondary AIR-injection (PAIR) system ignites unburned hydrocarbons and reduces carbon monoxide emissions.
S-DMS (Suzuki Drive Mode Selector) allows the rider to choose from three different engine settings depending on riding conditions or rider preferences.
An optimized 6-speed transmission features oil spray to the 4th, 5th, and 6th gears to reduce wear and mechanical noise during highway cruising.
Suzuki Clutch Assist System (SCAS) serves as back-torque-limiting system for smooth downshifts and also contributes to a light clutch pull.
A lightweight and rigid twin-spar aluminum frame minimizes weight while maintaining high torsional strength.
KYB inverted cartridge forks feature a Diamond-Like Carbon (DLC) coating surface treatment on the 43mm stanchion tubes to reduce friction and increase reaction to small surface irregularities. Spring preload, compression damping and rebound damping are fully adjustable.
A bridged aluminum alloy swingarm features a cross-sectional shape for increased rigidity, which also helps cope with improved rear tire grip and increased engine output. The Hayabusa’s fully adjustable rear shock absorber has a 43mm piston and 14mm rod diameter.
Large 310mm (12.2 inch) dual-floating-disc front brakes with efficient, race-proven aluminum-piston, radial-mount Brembo calipers, and 260mm (10.2 inch) single-disc rear brake with single-piston brake caliper work together with a new ABS system offering superior braking performance
The Hayabusa’s instrument cluster features four analog meters for speedometer, tachometer, fuel gauge and water temperature with an S-DMS mode indicator, gear position indicator and adjustable engine-rpm indicator.
Vertically stacked twin headlights provide increased light intensity, improved light distribution and match the elegant flow of the Hayabusa styling.
Advanced aerodynamics offering superb wind protection both for normal and completely tucked-in seating positions.
The tire’s profile and compound were developed through a variety of testing to achieve a high level of stability and handling.