Audi Q3 Red Track, Q3 Golden Dragon, RS Q3 and Audi e-bike participate in the 2012 Worthersee Tour (Photos)
Three of Audi Q3 themed cars, an Audi ebike and 16 production models will be seen on a 3,500 sq meter stand during the 2012 Worthersee Tour. Audi ebike prototype which according to Audi is based on a technical bike concept is something that fans will get to see between May 16 to 19, 2012 at Reifnitz, Worthersee in Carinthia, Austria.
The 3 Q3’s in display will be a Q3 Red Track, Q3 jinlong yufeng or Golden Dragon in the Wind and the Audi RS Q3 concept. These three are powered by a five cylinder TFSI engine offering between 228 kW and 265 kW power. Audi Q3 Red track is something that will appeal to most winter sports enthusiasts due to its internal heating capacity and internal heatable seat cushions. The roof top can carry two pairs of Audi skis made of carbon fiber reinforced polymer while its storage area can carry two hand lamps, heating elements and a thermos flask.
The Audi ebike is a high end pedelec manufactured by Audi for sport, fun and entertainment. It is lightweight and electrically mobile with 26” wheels made of CFRP. The entire ebike weights only 21 kgs while material reinforcements are added to load bearing points. It possesses torque of 250 Nm while peak output from its electric motor is 2.3 kW. It also features Segway like wheelie mode and can lock itself via iPhone.
All three concept Q3 vehicles have been displayed from May 16th onwards while viewers got a chance to also view the new Audi production car accessories which the company has been launching in the market from time to time.
Auto News Release
Audi at the 2012 Worthersee Tour
– Three Audi Q3 themed cars
– Audi e-bike Wörthersee: high-end sports equipment for stunts
– 16 production Audi models on 3,500 square meters of stand area
Audi is exhibiting concept vehicles for lifestyle, action and sport on the Wörthersee Tour. Three powerful versions provide new accents in the Q3 model family, and with its e-bike Wörthersee prototype Audi defines a technical bike concept that explores the limits of technical feasibility on the basis of Audi’s core competences “design”, “ultra”, “connect” and “e-tron”. This grand meeting of Audi, VW, Seat and Skoda fans is being held for the 31st time from May 16 to 19 in Reifnitz, on the Wörthersee in Carinthia, Austria.
A center of focus for Audi at this year’s Wörthersee Tour are the three Q3-based themed cars: the new Audi Q3 red track, the Audi Q3 jinlong yufeng or ‘Golden Dragon in the Wind’ and the Audi RS Q3 concept. All three add new but quite different aspects to the character of this compact SUV: leisure-oriented, sturdy, dynamic. They are powered by five-cylinder TFSI engines developing between 228 kW (310 hp) and 265 kW (360 hp).
The Audi Q3 red track will appeal to winter-sport enthusiasts. On its roof it carries two pairs of Audi skis made from carbon fiber-reinforced polymer. Stored in the load area are two hand lamps with radiant heating elements and a thermos flask, all supplied inductively with electric power. Heatable seat cushions are integrated into the reversible load-area mat.
This concept car has an Energy Red paint finish that has been given additional luster by golden pearl-effect particles. Add-on body elements are finished in matt grey quartz paint; some of these items will soon be appearing in the Audi accessories program. In the Singleframe radiator grille the aluminum struts are vertical and red panels partially blank off the air inlets. The high-gloss package accentuates the window areas. Two compact LED headlights are installed in the roof rack and back up the beams from the xenon headlights after dark. The tailpipes of the dual-branch exhaust system are integrated into the rear diffuser. Inside the headlights the zones in the lower part of the daytime running light strips are painted in the body color.
Inside the Audi Q3 red track the dominant colors are black, grey and red. The seats are upholstered in an innovative combination of leather and cloth: Narrow strips of leather only a few tenths of a millimeter in width are woven together with the yarn. Smaller segments of the upholstery are made from Velvet leather, a strong material that is given a fascinating appearance and feel by a special treatment process. The large inlays make use of a three-dimensional stainless steel mesh.
The Audi Q3 red track features a powerful engine: the turbocharged five-cylinder TFSI with a displacement of 2.5 liters, a power output of 250 kW (340 hp) and a maximum torque of 450 Nm (331.90 lb-ft). With this power and torque, the Q3 red track accelerates from 0 to 100 km/h in 5.4 seconds and reaches a top speed of 263 km/h (163.42 mph). A 7-speed S tronic transmission and quattro permanent all-wheel drive deliver the power to all four road wheels. The 20-inch wheels are fitted with size 255/45 offroad tires. Compared with the standard Q3 model the front and rear tracks are both 40 mm (1.57 in) wider and the ground clearance has been increased by 30 mm (1.18 in).
Only a few weeks ago the Audi Q3 jinlong yufeng (Golden Dragon in the Wind) and the Audi RS Q3 concept made their debut at the Auto China exhibition in Peking. The Audi Q3 jinlong yufeng, with a brilliant Liuli Yellow paint finish and yellow interior decor, conjures up a close link with windsurfing. Its 2.5 TFSI engine has an output of 228 kW (310 hp).
Even more power is available in the RS Q3 concept: Its 2.5 TFSI engine develops 265 kW (360 hp) – top performance for maximum dynamism. The body, with its flared wheel arches and blue paint finish, has been lowered by 25 mm (0.98 in). The add-on body elements are made from carbon fiber-reinforced polymer, with either a black or a blue lacquered finish. The individual honeycombs in the Singleframe grille are slightly offset. Inside the car, a cool black finish has been adopted. The seats have sport seat cushions and backs with the integral head restraints that are normally reserved for the S sport seats.
One of the highlights on the Audi stand is the bicycle technology concept known as the Audi e-bike Wörthersee – a sport bike that does not fit into any of the usual categories. It is neither a pedelec nor a conventional bike, but is best described as a high-end pedelec made by Audi for sport, fun and tricks. The Audi e-bike Wörthersee combines the Audi brand’s principal competences – design, ultra, connect and e-tron – and explores the limits of what is technically feasible in terms of design, lightweight construction, networking and electric mobility.
This show bike is futuristic at the very first glance – a bike for tomorrow and beyond. All its components, even the pedals, have been shaped by Audi’s designers, for instance the 26-inch wheels made from CFRP that weigh only 600 grams (1.32 lb) each and have innovative large-area blade-pattern spokes.
The Audi e-bike Wörthersee’s ultra-light carbon-fiber frame weighs only 1,600 grams (3.53 lb). It makes use of bionic principles derived from nature. Material reinforcements are needed only at the points where loads actually occur. The swinging arm for the rear wheel is also made of CFRP. All in all, the Audi e-bike Wörthersee represents the full extent of the brand’s expertise in ultra-lightweight design.
The rear wheel is driven by a chain. The electric motor is a permanent magnet synchronous machine; it is located at the lowest point on the frame and drives the bottom bracket shaft directly. Maximum torque at the rear wheel is in the region of 250 Nm (184.39 lb-ft). Peak output from the electric motor is 2.3 kW – a new top value on the e-bike scene. The complete bicycle weighs only 21 kg (46.30 lb), equivalent to a power-weight ratio of 9 kg (19.84 lb) per kilowatt, or 7 kg (15.43 lb) per horsepower – another record-breaking value.
The lithium-ion battery is housed in the frame; it weighs about 5 kg (11.02 lb) and operates at a voltage of 48 V. Its capacity is 530 Wh and it can be fully recharged from a 230 V supply in two and a half hours. As an alternative it can be easily detached from the bike and replaced by a recharged battery.
The rider of the Audi e-bike Wörthersee can choose between five programs; these either support use of the pedals or permit electric-only travel.
In the ‘Pure’ mode the rider only propels the bike by means of the pedals. In the ‘Pedelec’ mode the rider is assisted by the electric motor; a top speed of up to 80 km/h (50 mph) can be reached and the action radius is between 50 and 70 kilometers (31 and 44 miles). In the ‘eGrip’ program the Audi e-bike Wörthersee can be ridden with the electric motor providing all the necessary power; in this case at speeds up to 50 km/h (31 mph). The rider controls the power output from the electric motor at a twistgrip and can configure it at the on-board computer.
In ‘Wheelie’ mode the power flow is electronically controlled in order to assist the rider when the front wheel is in the air. Alternative operating modes are available, and can be selected by smartphone or directly at the e-bike: either ‘Power Wheelie’ with an adjustable wheelie angle for less skilled riders, or ‘Balanced Wheelie’ for those with more experience. In the latter mode the rider’s balance is maintained electronically: as his or her weight is displaced forward or back, this is counteracted by either braking or accelerating the electric motor.
In this way the rider can influence the speed when riding on the rear wheel only by shifting his or her weight. Leaning forward speeds up the bike, leaning back slows it down. If the rider wants to use the pedals and maintain a constant power input, the training mode can be chosen. The electric motor then makes good the extra power needed when riding into the wind or up a hill, so that the rider’s performance can be kept constant for training purposes.
The Audi e-bike Wörthersee has a varied specification. The nine-speed hydraulically actuated gear shift has a very rapid sequential action, similar to the R tronic transmission in an Audi R8. The two disk brakes are also applied hydraulically. Seat height can be continuously adjusted at a handlebar control, even while the bike is being ridden. The front fork uses the more complex ‘upside-down’ principle; it is air-sprung, with 130 mm (5.12 in) of travel. LEDs are used for powerful lighting: the front light is integrated into the handlebar, the rear light into the seat.
The on-board computer is located in the frame top tube and operated using a touchscreen. Among the functions it provides are riding mode selection, recording trick sequences and adjustment of various e-bike functions such as electric pedaling assistance and lighting. The display shows road speed, distance covered, state of battery charge, energy consumption and slope angle at any given moment.
The rider’s smartphone communicates by WLAN with the bike’s computer. The antenna is integrated into the front brake line. To ride the bike, the immobilizer is deactivated at the smartphone; the bike is then ready for use. In addition, by way of the interface between the bike’s computer and the smartphone, video images recorded while riding or even complete trick sequences can be transmitted to the Internet or the trainer. Every trick performed successfully qualifies for success points. As the number of points increases, the rider is rewarded and at the same time the challenge level rises. The total Internet ranking can be compared with friends or other riders. The rider can locate them by way of Facebook entries that can be shown on the Audi e-bike Wörthersee’s display.
The Audi stand at the Wörthersee
For the GTI meeting the Audi stand will not only display the Audi e-bike Wörthersee but also 16 production models from the current Audi product range. Among the exhibits that the brand will be presenting to its fans at the lakeside is the new Audi A3. The public will also be able to inspect the Audi S6 in Daytona Gray, pearl effect and the A1 quattro in Glacier White, metallic. Yet another model on show is the new Audi TT RS plus; it is on display next to an RS 4 Avant in Sepang Blue, pearl effect.
At the entrance to the Audi stand at Wörthersee there is the Audi TT RS Light Show car, a series-production vehicle that was modified by five AUDI AG apprentices over three months. Selected special equipment highlights include: A singleframe lit in red, a rear windscreen that functions as a projection screen for photos and videos, and red daytime running lights which visualize the bass lines of music.
The three Q3 concept vehicles will appear in a stage show starting from Wednesday, May 16; this will take place hourly on the Audi stand and be followed by a discussion with experts participating.
After the Q3 show comes a dynamic presentation of the Audi e-bike Wörthersee. Trial biker Julien Dupont and women’s downhill specialist Petra Bernhard will demonstrate their stunt skills on the stage. The show bike, which has no gear shift, permits controlled rear-wheel wheelies. Acceleration sensors detect the bike’s position and the rider’s body weight in relation to the force of gravity; the control unit registers this data and varies the electric motor’s power output as necessary. The stunts appear on Facebook, where they are assessed according to a points system.
New production-car accessories
Since the A1 market launch Audi Genuine Accessories has introduced new customizing kits twice a year. The competition kit legends is now followed by the competition kit eleven and competition kit eleven plus.
The new kit consists of decal sets for the roof, trunk and engine hood, with a large ‘11’ as a prominent decor feature. Highlights inside the car include decorative trims at the ventilation outlets, the center console, the door pulls and the interior mirror, and decorative textile floor mats.
The ‘11’ that gives the kit its name recalls motorsport successes in 2011. Audi racing drivers crossed the line ahead of the field no fewer than 11 times in German Touring Car Masters events and in the classic 24 Hours of Le Mans.
For the competition kit eleven plus, there are matching decals for the sides of the car as well.
An ideal accompaniment for the competition kit eleven (or eleven plus) is the roof spoiler in contrasting Misano Red, which is exclusive to this kit. To distinguish between the Audi A1 and Audi A1 Sportback, the roof spoiler for the five-door model is a totally new design.